Zoom

Yuneec CGO3+ Mount Set for the Typhoon H YUNCGO3P105 - Yuneec CGO3+ Mount Set for the Typhoon H. Featurin shown from the fron

Yuneec CGO3+ Mount Set for the Typhoon H YUNCGO3P105

| Questions about this item? Ask here.

Your Price: $14.99

Availability: In Stock

Part Number: YUNCGO3P105

SKU: PH-LI9J-FC

Quantity

Write a Review

Description
Customer Reviews
Questions and Answers
In The Box

The Yuneec CGO3+ Mount Set features the upper dampening plate for the CGO3+ 4K camera on the Typhoon H hexacopter. The upper dampening plate is also compatible with the Typhoon H Plus/Typhoon H3 and H520 payloads. This component is OEM direct from the manufacturer.

Rating Snapshot

Select a row below to filter reviews.

Average Customer Ratings

4.7

View All Reviews - Reset

Reviews Sorting

As advertised

Product was exactly as advertised. Arrived on time as well. The only downside is that this only comes with 2 pins and 2 clips when there are 4 required. My assumtion is that they figure that all 4 didn't break but how much can these tiny plastic pins and disks really cost?!?!?!? I would have giving a 5 star rating if 4 of these were included. Also there should be an option to purchase only the pins and clips as I would by 50+ just to have on hand.

Did you find this helpful? 9 of 10 Found Helpful

Reviewed by: Randy C Thomas from Florida on 11/6/2016

good

Product conforms to the picture and fast delivery

Did you find this helpful? 4 of 5 Found Helpful

Reviewed by: Pistol Olivier from France on 11/12/2016

As Expected

The parts arrived as expected and work as advertised. I don't recommend paying the extra for expedited shipping it was a week before I received the parts. There aren't any instructions, however, I found YouTube videos that adequately explained how to replace the broken parts. Took about 30 minutes to be up and running.

** Vertigo Drones ** Item Ordered on 9 November, Delivered 12 November

Did you find this helpful? 3 of 4 Found Helpful

Reviewed by: Butch Knightner from Seneca, SC on 12/9/2016

Total satisfaction

Item arrived on time and was what I needed to repair my Drone. Item was actually pulled and shipped the same day I ordered. Awesome service. That takes it from customer service to customer satisfaction!!!

Did you find this helpful? 2 of 3 Found Helpful

Reviewed by: BRYAN K UNDERWOOD from NRH Texas on 1/4/2017

Fast

The part arrived very fast and worked great

Did you find this helpful?

Reviewed by: Sam Koch from Westminster on 2/3/2017

View all Q&A

Q: Can you use four pins to make it more secure or is there a reason why there is only two?

Asked by: kevgk044 - 9/17/2017

A: There is no logical reason Yuneec chose not to include 4 retaining pins. Installing 4 pins will not necessarily prevent damage but will not adversely affect anything.

Was this answer helpful? 8 of 11 Customer(s) found this Answer helpful.

Answer provided by: Andrew (9/18/2017)

Submit an answer

Q: Does this come with the pins and locks to prevent the camera from falling off?

Asked by: Doug Gleason - 7/13/2016

A: Yes. It now includes the plastic pins.

Was this answer helpful? 6 of 9 Customer(s) found this Answer helpful.

Answer provided by: Andrew (8/3/2016)

Submit an answer

Q: I see whats wrong, the base plate is the part that need, the part that slides on the drone broke the slides I need the the base plate, when I crashed it broke the slides that attach it to the drone, I'm looking at the base plate on your website, my problem is I can't seem to figure out how the base plate comes away from the wiring and contacts. Is this something I can do without taking it in for repairs? So far I've got the washers off the two pins, haven't gotten any farther in the last hour. Any help with this would be appreciated. The drone is a Typhoon H with a CGO3 +

Asked by: Paul Couture - 5/11/2017

A: Hello Paul,

If you are looking to swap out your mountset for the CGO3+, you will need to remove the three silver screws that are holding the contact plate in its place, once you loosen this panel, the contact plate and wiring can be separated from the top dampening plate and swapped out

Was this answer helpful? 5 of 7 Customer(s) found this Answer helpful.

Answer provided by: Spencer (5/16/2017)

Submit an answer

Q: Is there 4 pins or just 2 that hold the camera bracket together because mine only has 2 I just bought new?

Asked by: REX DICKEY - 5/16/2017

A: Hello SIr,

Only two pins are needed to secure the slip ring wires from damage, each on an opposite corner

Was this answer helpful? 4 of 7 Customer(s) found this Answer helpful.

Answer provided by: Spencer (5/17/2017)

Submit an answer

Q: Can you just purchase the retaining pins? My mount is fine, I just need the washers the lock the pin in place.

Asked by: Mark - 8/7/2017

A: We are working with Yuneec to make the pins available. Please check back in the near future for availability.

Was this answer helpful? 4 of 6 Customer(s) found this Answer helpful.

Answer provided by: Andrew (8/11/2017)

Submit an answer

Q: the picture only shows 2 of the 4 retaining pins is that all this comes with? I am in need of 4 pins and the clips.

Asked by: Casey Owens - 3/1/2019

A: The mount set only comes with two, because it is only suggested to have two retaining pins one on each side diagonally. We do not sell the retaining clips separately, they only come with the mount set.

Was this answer helpful? 4 of 6 Customer(s) found this Answer helpful.

Answer provided by: Amanda Saul (3/1/2019)

Submit an answer

Q: bought typhoon h , only two of 4 mounts are connected, is this normal?

Asked by: j - 3/11/2017

A: Yes, this is how they are shipped from the factory. Two is sufficient to prevent wire damage in the even of a hard landing.

Was this answer helpful? 3 of 4 Customer(s) found this Answer helpful.

Answer provided by: Andrew (3/20/2017)

Submit an answer

Q: Is there 4 of the pins and the washer clips with this kit ?

Asked by: Earl Mannette - 10/23/2017

A: This kit comes with 2 pins and 2 washer clips.

Was this answer helpful? 3 of 6 Customer(s) found this Answer helpful.

Answer provided by: Amanda Saul (3/15/2018)

Submit an answer

Q: Will this fit my Typhoon QS 500 4K ? It looks the same other than another contact window. Thanks

Asked by: David Martin - 2/3/2021

A: Unfortunately this will not fit the Q500 since the mount is slightly different.

Was this answer helpful? 2 of 4 Customer(s) found this Answer helpful.

Answer provided by: Amanda Saul (5/11/2021)

Submit an answer

Q: Will this mount fit the Yuneec typhoon Q500+ ?

Asked by: hightv - 7/5/2017

A: No. The mount set you are looking for can be found at the following link: https://www.vertigodrones.com/Yuneec-Mount-Set-CGO3_p_183.html

Was this answer helpful? 1 of 3 Customer(s) found this Answer helpful.

Answer provided by: Andrew (8/6/2017)

Submit an answer

Questions about this item? Ask here.

Yuneec H850 Series SD Card Board to IO Board FPC Wire YUNH850131SVC

(0)

$4.99

In Stock

Add to Wish List

Add to Cart

Yuneec H850 Series Top Portion of Standard Gimbal Mount YUNH850145SVC

(0)

$69.99

In Stock

Add to Wish List

Add to Cart

DJI Inspire 3 High Altitude Foldable Quick-Release Propellers (CP.IN.00000044.01)

(0)

$89.00

In Stock

Add to Wish List

Add to Cart

YUNEEC Typhoon H Two-in-One Fast Balancing Smart Charger by Gifi (HCHG)

(0)

$169.99

In Stock

Add to Wish List

Add to Cart

DJI TB65 Intelligent Flight Battery for Matrice 350 RTK (CP.EN.00000457.01)

(0)

$700.00

In Stock

Add to Wish List

Add to Cart

DJI Mini 4 Pro Fly More Combo with RC 2 Controller (CP.MA.00000735.01)

(0)

$1,099.00

Out of Stock

Add to Wish List

Add to Cart

DJI Mini 4 Pro Intelligent Flight Battery (CP.MA.00000756.01)

(0)

$65.00

In Stock

Add to Wish List

Add to Cart

DJI Control Sticks for RC Pro Remote Controller (CP.MA.00000461.01)

(0)

$12.00

In Stock

Add to Wish List

Add to Cart

DJI FlyCart 30 C8000 Intelligent Battery Charging Station (CP.AG.00000811.02)

(0)

$1,499.00

In Stock

Add to Wish List

Add to Cart

DJI FPV Remote Controller 3 (CP.RC.00000024.01)

(0)

$199.00

In Stock

Add to Wish List

Add to Cart

DJI Avata 2 Sling Bag (CP.FP.00000154.01)

(0)

$89.00

In Stock

Add to Wish List

Add to Cart

Yuneec H600 9800mAh Intelligent Flight Battery (YUNH600US114)

(0)

$879.00

Preorder

Add to Wish List

Add to Cart

[history_item_name]

[ITEMPRICE] ~~[ITEMPRICE] Original price~~ [ITEMSALEPRICE] Sale

Clear

Government Drones

Commercial Drones

Yuneec Drones

DJI Drones

Autel Robotics

Repairs & Service

Yuneec CGO3+ Mount Set for the Typhoon H YUNCGO3P105

Average Customer Ratings

Related Items

Recently Viewed Items