Mount Set: Yuneec Typhoon H CGO3+

Home > Yuneec > Yuneec OEM Parts > Mount Set: Yuneec Typhoon H CGO3+

Review(s)

| Questions about this item? Ask here.

(See 13 Questions)

In Production

Availability: Out of Stock

Part Number: YUNCGO3P105

SKU:PH-LI9J-FC

Quantity

Description
Customer Reviews
Questions and Answers

In The Box

Replacement mount set for CGO3+ on Yuneec Typhoon H. Includes plastic retaining pins.

Replaces Part #: YUNCGO3P101
UPC: 813646026026

View All Reviews

As advertised

Product was exactly as advertised. Arrived on time as well. The only downside is that this only comes with 2 pins and 2 clips when there are 4 required. My assumtion is that they figure that all 4 didn't break but how much can these tiny plastic pins and disks really cost?!?!?!? I would have giving a 5 star rating if 4 of these were included. Also there should be an option to purchase only the pins and clips as I would by 50+ just to have on hand.

Did you find this helpful? 8 of 9 Found Helpful

Reviewed by: (Verified Buyer) Randy C Thomas from Florida on 11/6/2016

good

Product conforms to the picture and fast delivery

Did you find this helpful? 4 of 5 Found Helpful

Reviewed by: (Verified Buyer) Pistol Olivier from France on 11/12/2016

As Expected

The parts arrived as expected and work as advertised. I don't recommend paying the extra for expedited shipping it was a week before I received the parts. There aren't any instructions, however, I found YouTube videos that adequately explained how to replace the broken parts. Took about 30 minutes to be up and running.

** Vertigo Drones ** Item Ordered on 9 November, Delivered 12 November

Did you find this helpful? 3 of 4 Found Helpful

Reviewed by: (Verified Buyer) Butch Knightner from Seneca, SC on 12/9/2016

Total satisfaction

Item arrived on time and was what I needed to repair my Drone. Item was actually pulled and shipped the same day I ordered. Awesome service. That takes it from customer service to customer satisfaction!!!

Did you find this helpful? 2 of 3 Found Helpful

Reviewed by: (Verified Buyer) BRYAN K UNDERWOOD from NRH Texas on 1/4/2017

Just what I needed

This is something everyone needs in their crash kit. I got is in a timely manner and was so easy to install.

Did you find this helpful?

Reviewed by: (Verified Buyer) Michael Klepper from California on 1/31/2017

View all Q&A

Q: the picture only shows 2 of the 4 retaining pins is that all this comes with? I am in need of 4 pins and the clips.

Asked by: Casey Owens - 3/1/2019

A: The mount set only comes with two, because it is only suggested to have two retaining pins one on each side diagonally. We do not sell the retaining clips separately, they only come with the mount set.

Was this answer helpful? 2 of 2 Customer(s) found this Answer helpful.

Answer provided by: Amanda Saul (3/1/2019)

(Submit an answer)

Q: i looked but cant find the lower part of Part Number:YUNCGO3P105 ?, can you help, thanks

Asked by: THONG - 11/21/2017

A: You can find the bottom dampening plate in the link below,

https://www.vertigodrones.com/Yuneec-CGO3-Bottom-Dampening-Plate_p_448.html

Was this answer helpful? 1 of 3 Customer(s) found this Answer helpful.

Answer provided by: Amanda Saul (4/20/2018)

(Submit an answer)

Q: Will this mount set , the shock dampers fit the Q500 as well???

Asked by: Phil K - 11/18/2017

A: The Q500 has different dampers than the Typhoon H CGO3+ mount set. You can find the mount set with dampers for the Q500 with the link I have provided below.

https://www.vertigodrones.com/Yuneec-CGO3-Mount-Set-Q500-4K_p_183.html

Was this answer helpful? 1 of 2 Customer(s) found this Answer helpful.

Answer provided by: Amanda Saul (3/16/2018)

(Submit an answer)

Q: Is there 4 of the pins and the washer clips with this kit ?

Asked by: Earl Mannette - 10/23/2017

A: This kit comes with 2 pins and 2 washer clips.

Was this answer helpful? 2 of 4 Customer(s) found this Answer helpful.

Answer provided by: Amanda Saul (3/15/2018)

(Submit an answer)

Q: Can you use four pins to make it more secure or is there a reason why there is only two?

Asked by: kevgk044 - 9/17/2017

A: There is no logical reason Yuneec chose not to include 4 retaining pins. Installing 4 pins will not necessarily prevent damage but will not adversely affect anything.

Was this answer helpful? 7 of 9 Customer(s) found this Answer helpful.

Answer provided by: Andrew (9/18/2017)

(Submit an answer)

Q: there are four holes but you show only two pins? John Morandi

Asked by: John - 8/16/2017

A: The pins are installed on opposite diagonal corners. Only two are shipped from the manufacturer.

Was this answer helpful? 1 of 4 Customer(s) found this Answer helpful.

Answer provided by: Andrew (8/21/2017)

(Submit an answer)

Q: Can you just purchase the retaining pins? My mount is fine, I just need the washers the lock the pin in place.

Asked by: Mark - 8/7/2017

A: We are working with Yuneec to make the pins available. Please check back in the near future for availability.

Was this answer helpful? 4 of 5 Customer(s) found this Answer helpful.

Answer provided by: Andrew (8/11/2017)

(Submit an answer)

Q: Will this mount fit the Yuneec typhoon Q500+ ?

Asked by: hightv - 7/5/2017

A: No. The mount set you are looking for can be found at the following link: https://www.vertigodrones.com/Yuneec-Mount-Set-CGO3_p_183.html

Was this answer helpful? 1 of 2 Customer(s) found this Answer helpful.

Answer provided by: Andrew (8/6/2017)

(Submit an answer)

Q: Is there 4 pins or just 2 that hold the camera bracket together because mine only has 2 I just bought new?

Asked by: REX DICKEY - 5/16/2017

A: Hello SIr,

Only two pins are needed to secure the slip ring wires from damage, each on an opposite corner

Was this answer helpful? 4 of 6 Customer(s) found this Answer helpful.

Answer provided by: Spencer (5/17/2017)

(Submit an answer)

Q: I see whats wrong, the base plate is the part that need, the part that slides on the drone broke the slides I need the the base plate, when I crashed it broke the slides that attach it to the drone, I'm looking at the base plate on your website, my problem is I can't seem to figure out how the base plate comes away from the wiring and contacts. Is this something I can do without taking it in for repairs? So far I've got the washers off the two pins, haven't gotten any farther in the last hour. Any help with this would be appreciated. The drone is a Typhoon H with a CGO3 +

Asked by: Paul Couture - 5/11/2017

A: Hello Paul,

If you are looking to swap out your mountset for the CGO3+, you will need to remove the three silver screws that are holding the contact plate in its place, once you loosen this panel, the contact plate and wiring can be separated from the top dampening plate and swapped out

Was this answer helpful? 5 of 6 Customer(s) found this Answer helpful.

Answer provided by: Spencer (5/16/2017)

(Submit an answer)

40 points will be rewarded to you when you buy this item.

Government Drones

Commercial Drones

Yuneec Drones

DJI Drones

Autel Robotics

Repairs & Service

Mount Set: Yuneec Typhoon H CGO3+

Price

Availability:

Reward Points

Recently Viewed Items

Browse Similar Items