E30Z Optical Zoom Camera Features
- 30x optical zoom
- 6x digital zoom
- 1080p video resolution
- 360° unlimited yaw rotation
- 3-axis gimbal
- Designed for YUNEEC H520 Hexacopter
- 2.55 s zoom speed (from wide to tele)
Yuneec H520 Features
When using the zoom function on the Yuneec E30Z, the camera stabilization plays a very important role. The 3-axis gimbal automatically compensates for slight gusts of wind and drone movements allowing for a nice steady shot. This works with ± 0.02° accuracy and produces smooth video recordings and sharp photos every single time.
Impressive Zoom Speed
The maximum zoom speed from wide-angle to tele is just 2.55 seconds. This helps you capture important information in a short amount of time - even from a distance. Specific camera settings such as photography modes or white balance can be adjusted using the ST16S controller's integrated touch screen. The focusing of the camera is done automatically via autofocus.
- Six-rotor (Hex) safety, stability and reliability
- High wind-resistant airframe
- Interchangeable payloads/sensors
- Up to 28 minute flight time based on payload weight
- 360º continuous rotation camera gimbal
- Retractable landing gear
- ST16S ground station w/ integrated 7” display
- DataPilot™ mission control software system
- HDMI® output for 720P display to Command/Control
- Yuneec SDK application development
- Interchangeable payloads (E50,E90,CGOET)
- Precision Flight Plans
- Automated Flight Control
Law enforcement agencies increasingly rely on sUAS systems for accident scene reconstruction. The Yuneec H520 six-motor sUAS system allows Law Enforcement officers to safely and reliably record an accident scene in 2D or 3D. The H520 is compatible with 3rd party 3D imaging software and Yuneec’s DataPilot™ software enables autonomous flight for high-speed, precise data collection.
Yuneec commercial sUAS are designed with the inspection industry in mind with a sixrotor system that allows for precision flight and longer focal-length lenses that allow the sUAS to fly at greater distance from an asset. In high-wind environments, the Yuneec H520 sUAS system is able to hold position, allowing the solution to fly even when a manned inspection would be deemed unsafe.
Yuneec H520 sUAS are capable of low and slow flight with greater stability and safety than a typical quad-copter system. Greater airframe stability, combined with Yuneec’s 1-inch 4K resolution E90 camera, provides for higher quality imaging, resulting in superior high-resolution 2D ortho or 3D maps, precision volumetrics, and 3D surface models.
Pre-plan Your Flight Mission
EFFICIENT MISSION CONTROL SOFTWARE SYSTEM
Yuneec DataPilot™ is a complete solution for planning survey and waypoint-based UAV flight. Unlike other flight planning applications, DataPilot™ is integrated with the hardware and software control system utilized by the Yuneec H520 sUAS.
Precise Flight Plans
Our DataPilot™ software system enables users to efficiently and consistently create orthomaps, 3D scans, crop data imagery, or cinematic movement for repeatable, recallable aerial flight paths, without requiring expensive 3rd party software. Surveys, construction measurement, BIM components, perimeter security, accident scene reconstruction, forensic captures, 3D scans, orthomosaic, photo-stitching are generated with precision and efficiency via the DataPilot™ interface.
Missions may be stored for later recall, or planned off-site and transported to the control system via email, thumbdrive, or micro- SD card. Mac and PC users may plan missions offsite and execute missions on-site, allowing for timeplanning, collaborative mission planning, and archiving of missions in a cloud or local storage.
Automated Flight Control
DataPilot™ auto-generates survey paths with user-defined overlap/sidelap, and cross-hatching for precision 3D or large format image output. Users may define a survey resolution via altitude or inchper- pixel decisions, providing a platform that is capable of flight even in low altitude scenarios. DataPilot™ also allows for storage of maps from many map providers for access in areas with no connectivity, and provides tools for precise waypoint placement even in areas where no updated maps are available.
View Live Feed With The ST16S
DataPilot™ is integrated with the Yuneec ST16S Ground Control Station via the built-in Android 7” Multi-function display, and may be used for exporting flight logs, integrating with popular analytics and post-processing applications such as Pix4D™, Agisoft™, Datumate™, DroneDeploy™, Dronifi™, and many others.