The DJI M30 series provides unique aerial intelligence, allowing you to capture every single detail.
- Wide-Angle (12MP)
- Zoom (48MP 5-16x Optical/200x Digital)
- Laser Rangefinder
Ready to Fly in the Harshest Conditions
Designed to withstand the harshest of environments, the M30 features an Ingress Protection rating of IP55 with an operating temperature -4 to 122 °F (-20 to -50°C). An IP55 rated product is protected against dust ingress that could be harmful for the normal operation of the product but is not fully dust tight. It is protected against solid objects and water jets projected by a nozzle (6.3mm) from any directions.
Compact Design with Professional Features
The M30 series features the compact size and design of the Mavic, with all the enterprise capabilities of the Matrice 300. Easily transport the M30 to job sites and save space in the process.
Compatible with DJI Dock
DJI Docks are rugged, reliable, and are built to operate 24/7, day or night, rain or shine. Each DJI Dock houses a Matrice 30 where it lands, recharges, takes off, and executes missions programmed in DJI FlightHub 2.
A New Generation of Commercial Drones
The DJI M30 series has raised the bar for commercial drone manufacturers. By combining multiple camera options into one gimbal, you no longer have to buy expensive individual payloads. This decreases downtime because it eliminates the need for payload swaps between missions. Now you can fly longer, and capture more data in less time.
Powerful Flight Performance
The M30 series delivers a balance of power and portability, providing higher operational efficiency and reliability.
- 41-Minute Maximum Flight Time
- 22,966 ft (7,000 m) Service Ceiling
- 33.5 mph (15 m/s) Wind Resistance
- 51 mph (23 m/s) Maximum Speed
With IP55 protection, the M30 series can easily handle adverse weather and temperatures ranging from -4 to 122 °F
Safety and Reliability
Dual-vision and ToF sensors appear on all six sides of the aircraft, keeping it and your mission safe. The built-in ADS-B receiver provides timely warnings of any incoming crewed aircraft nearby.
Redundancies and Backup Systems
Built-in advanced redundancy systems help keep your critical missions going even in unexpected scenarios.
I. Flight Control Sensor Redundancy
Dual Inertial Measurement Unit:
An inertial measurement unit (IMU) measures the aircraft’s real-time three-axis acceleration and angular velocity, and helps calculate the aircraft’s velocity, position, and attitude angle. The M30 is designed with an industrial-grade IMU redundancy, in addition to fault diagnostics mechanisms and redundancy switching algorithms. In the unlikely case that the main IMU fails, the backup IMU will activate to maintain flight safety and reliability.
A barometer determines relative altitude based on atmospheric pressure, and provides precise altitude readings for the aircraft. The M30 Series dual barometer redundancy design allows the drone to switch to the backup barometer if the primary one fails, ensuring flight stability and aircraft reliability.
Dual RTK Antennas + GNSS Module:
The Real Time Kinematic (RTK) system provides centimeter level and altitude positioning accuracy to the M30 series. Dual system redundancy of RTK Antennas and GNSS Module ensures stable working of positioning system. In addition to maintaining the drone’s heading, the dual RTK antennas also back up the compasses so that the drone can safely and stably navigate complex environments with electromagnetic interference. At the same time, the dual antennas are mutually redundant, and both can be used as antennas for RTK positioning system and GNSS Modules.
A compass provides heading information for the drone. The M30 Series has two compasses to ensure that it continues on the right course even if one of the compasses fails. Meanwhile, the compasses are backed up by the two antennas in the RTK modules, so that in the case where the RTK modules are blocked, the compasses can still help the drone maintain course.
Six Pairs of Vision Sensors:
The vision sensor pairs provide binocular machine vision, which senses changes in the aircraft’s position and attitude, visually positioning the aircraft while helping it sense obstacles. If one or more of the sensor pairs are down(Less than 6), the ToF sensors and the remaining vision sensors can still keep the drone functioning safely.
Obstacle Sensing Range:
Upward / Down / Backward / Left / Right: 33m
Forward: 30 m
Six Infrared ToF Sensors:
Infrared ToF sensors resolve the distance to an object using time-of-flight techniques, measuring the round-trip time of an infrared light signal. The M30 Series is equipped with ToF sensors that provide real-time information on the surroundings of all six sides of the aircraft. When operated at night or in lowlight conditions, and if the vision system is out of commission, the drone can still rely on the ToF sensors to maintain obstacle sensing abilities.
Obstacle Sensing Range: 0.1 - 10 m FOV 30°
2. Control Signal Redundancy:
The communication link between flight control system and the Electric Speed Controller System uses Serial Peripheral Interface (SPI) and Universal Asynchronous Receiver-Transmitter (UART) dual redundancy to ensure safe and stable communication between the flight control system and ESC system.
3. Dual Intelligent Batteries:
The M30 series uses dual battery power supply, when the aircraft is flying. If a single battery fails, the other battery can also maintain the normal operation of the aircraft to ensure a safe landing.
4. Dual Transmission Links:
The M30 series has a four-antenna redundancy design, with each single antenna being capable of providing the aircraft with transmission services. Meanwhile, both the 2.400 to 2.4835 GHz and the 5.725 to 5.850 GHz bands are supported, so in high-interference environments where one band becomes unavailable, the drone will automatically switch to the other band. In addition, the M30 series also supports OcuSync 3 Enterprise and 4G network transmission to work simultaneously, providing an extra layer of transmission redundancy flight safety to the greatest extent.
5. Dual Remote Controller Redundancy:
The dual remote controller mode of the M30 Series allows each of the two operators to take over control of the aircraft and payloads quickly in the case where communication is lost between the RC and the drone. Operations can continue seamlessly without compromising flight safety.
6. Three-propeller Emergency Landing:
In the unlikely case of a motor malfunction during flight, the M30 Series can make an emergency landing with just three propellers/motors. Basic controls, such as ascending, descending, and horizontal movements, are still in place. Inevitably, the drone and the payload will be damaged during the landing, but the operator can choose to land somewhere away from people or buildings to keep them safe.
M30 Series is equipped with DJI AirSense, a technology that enhances airspace safety by providing the operator with real-time information about airplanes and helicopters within 20 km, including their position, altitude, heading, and velocity. The risk of a close encounter with another aircraft is sent to the pilot in real-time in the DJI Pilot app, so informed decisions can be made quickly to ensure safety.
Enhanced Transmission Range
Four built-in antennas support OcuSync 3 Enterprise, which enables triple-channel 1080p video transmission, and seamless swapping between input feeds, even in complex environments.
Lightweight and Portable Design
Compact and foldable, the M30 Series is easy to pack up, carry, and deploy.
Capture Every Detail
The M30 Series integrates wide, zoom and a laser rangefinder, which together can capture the aerial data you need, when you need it.
Equivalent Focal Length: 24 mm
12 MP 1/2'' CMOS Sensor
Video Resolution: 4K/30fps
48 MP 1/2'' CMOS Sensor
5x-16x Optical Zoom
200x Max. Hybrid Zoom
Photo Resolution: 8K
Video Resolution: 4K/30fps
Range: 3 m - 1200 m
Superior Image Quality
Night Flight - With the FPV camera optimized for low-light conditions, the ground and skyline are clearly visible, even at night, so you can fly with safety and confidence.
Smart Low-Light Photos - Capture bright, clear images in low-light conditions with Smart Low-Light Photo.
RGB/Zoom - See it all from above.
Laser Rangefinder - PinPoint an object in view, and advanced sensor fusion algorithms immediately deliver its coordinates.
A Controller Built for Commercial Drone Pilots
The 7-inch widescreen DJI RC Plus with dual control mode is tailor-made for Enterprise users.
Enterprise Environmental Adaptability:
- IP54 Protection (Water and dustproof)
- -4 to 122 °F (-20 to -50°C) Operating Temperature
Improved Stability and Battery Life
- Four Antenna OcuSync 3 Enterprise, Cover more area with stable video transmission and removable dual-antennas.
- Extended Battery Life, Internal and external battery configuration powers 6 hours of battery life and enables hot-swapping for seamless, uninterrupted flight operations.
All-new DJI Pilot 2
A revamped Enterprise flight interface designed to improve piloting efficiency and flight safety.
Reimagined User Interface
Drone and payload controls can be easily accessed with one tap. Clear presentation of flight details and navigational information improves user experience and flight efficiency.
Ergonomic Design For Safety and Efficiency
Pilot 2 works seamlessly with the DJI RC Plus. Screenside and customizable buttons are all within reach and enable quick operations, such as adjusting camera views and dropping PinPoints.
A comprehensive checklist helps you quickly confirm aircraft status and parameter settings, so you can take off with confidence.
An optimized interface displays your home point, PinPoints, and nearby obstacles to improve safety and provide comprehensive situational awareness.
Stay updated with timely alerts as conditions and scenarios evolve.
DJI FlightHub 2
Collect and compile accurate data with the all-new FlightHub 2.
Master Your Mission Environment
FlightHub 2 offers a 2.5D Base Map for quick terrain awareness, One-Tap Panorama Sync for rapid site overviews, and Cloud Mapping for fast mapping in RGB or infrared.
Mission Live Streaming
Connect multiple users to one or many drone operations simultaneously, and keep teams updated with the latest developments thanks to low latency, high-resolution livestreaming.
Highlight objects or areas of interest for efficient mission management and resource distribution. Annotations are visible to ground teams, pilots, or any team member for timely project alignment and task distribution.
Streamlined Team Communication
Synchronize valuable information such as teams position, drone status, mission details and more, in real time and across multiple device types, making team collaboration easier than ever.
The DJI M30 series offers Route Planning and Management, which allows you to plan flight routes and missions in FlightHub 2 that can be easily synchronized with Pilot 2. Operation data can be automatically uploaded to FlightHub 2 Media Files for unified management and analysis.
An upgrade to Live Mission Recording brings an optimized user interface, convenient task recording, and target point marking, saving 90% of operation steps. Gimbal angle and photo settings can be adjusted between Waypoints, improving flight and mission efficiency.
DJI Dock Compatible (Sold Separate)
For non-stop operations - the DJI Dock (M30 Series Dock Version) has flagship-level performance with a maximum operation range of 4.34 miles (7 km), IP55 weather resistance, and resilience in temperatures ranging from -31°F to 122°F (-35°C to 50°C).
Fast Charging for Fast Turnaround
Fast charge and take off thanks to TEC air conditioning that cools the drone batteries, enabling charging from 10-90% in just 25 minutes.
Cloud Platform Management
With FlightHub 2, unlock full DJI Dock functionality from the cloud. Schedule missions, create and edit flight routes, and manage data collected.
Cloud API opens up DJI Dock functionality to developers and system integrators, who can set up a custom, private server.
BS30 Intelligent Battery Station
A smart, portable solution with multiple charging modes to meet your mission needs. Capable of charging four pairs of TB30 Intelligent Flight Batteries and one pair of RC Plus batteries, pairs are charged one at a time, with one pair taking just 30 minutes to charge from 20-90%.
TB30 Intelligent Flight Battery
Each battery supports self-heating for cold environments, hot-swapping for fast turnarounds, and 400 charge cycles for increased operational efficiency.
User Data Security
DJI is driven by the relentless pursuit of making complex technology accessible to all. Nowhere is this commitment more visible than in how we help commercial, civil, and government users around the world to find innovative ways to use our technology, bringing value throughout a wide range of industries.
Given the unique role drones play as a data capture device, we understand how important data security is to our commercial, civil and government customers. That’s why we give our users control over the data they generate. We buttress this commitment by providing in-depth information on how DJI drone platforms protect the data of our customers, and outlining the strategies and processes we use to continually improve information security.
How You Control What Data DJI Can Access
DJI will not access any user data unless the user grants DJI permission to do so.
Users can choose to grant or revoke permissions anytime in the "Network Security Mode" settings. Such permissions include access to device information, flight records, device logs, approximate location information, user experience improvement program information, and whether DJI can share your device location with third-party map service providers in order to display your location on the map.
You can enable "Local Data Mode" to use your device completely offline. In this case, you do not need to log in to your DJI account. Installer packages to upgrade your device can be downloaded directly from the DJI website. Soon, we will release features such as custom offline maps and offline import of certificates to unlock restricted zones.
Data Encrypted for Enhanced Security
Data transmitted between the drone and the controller on the ground is protected by the AES-256 encryption algorithm. The communication between the DJI Pilot app and the server is also protected by HTTPS or WebSockets over SSL/TLS (WSS) protocol to prevent hijacking by third parties.
Cloud Data Storage Security
DJI's data centers are built on Amazon Web Services (AWS) and Alibaba Cloud. Alibaba Cloud is used only for customers in Mainland China. Amazon Web Services is used for all other regions.
DJI users are not required to store any data with DJI. If they choose to do so, their data is kept in DJI's data centers which are equipped with a multi-layer protection mechanism. DJI will not transmit users' personal information or data across data centers or share any data with any third parties. Sensitive information such as email addresses, mobile numbers, and location information is given additional AES-256-CBC encryption.
Users can choose to erase any data generated during their use of DJI devices. To erase your data, go to the DJI Pilot app to clear the logs and cache on your device and the app, or restore the device to factory settings. If you decide not to use DJI’s services anymore, please email [email protected]
to ask DJI to delete all the data associated with your account.
Third Party Security Audits
The truth about DJI’s drones and software systems has been repeatedly examined and confirmed by trusted U.S. cybersecurity firms FTI Consulting, Booz Allen Hamilton, and Kivu Consulting, as well as U.S. federal agencies including the Department of Defense, Department of Interior, Department of Homeland Security and National Oceanic and Atmospheric Administration. A summary of the report is available at this link.
Drone technology will always face scrutiny when used in sensitive or secure operations, just like other technology products – and rightfully so. As governments and enterprises set security standards for drone use, DJI’s goal is to meet or exceed those standards.
Open Developer Ecosystem
MSDK - Mobile SDK 5 simplifies the development of apps to control the Matrice 30 Series. Mobile SDK 5 is fully open source and comes with production code samples of core DJI Pilot 2 modules.
DSDK - The M30 Series Onboard SDK and Payload SDK ports have been merged into one. Together with the M30's PSDK quick-release frame, this facilitates easier development and deployment of 3rd party payloads.
Cloud API - With Pilot 2's built-in MQTT based protocols in DJI Cloud API, you can directly connect the Matrice 30 Series to Third-Party cloud platforms without having to develop an App. Access the drone's hardware, video live-stream, and photo data. Cloud API also supports DJI Docks, which can be connected to Third-Party platforms for management of Docks, mission planning, and data transfer.
DJI Care Enterprise
DJI Care Enterprise was specially created to provide comprehensive protection for your DJI Enterprise products. Offering coverage options with unlimited replacements or free repair services for accidental damage such as crashing, water damage, or signal interference. This efficient and total accident protection service provides greater peace of mind for your entire DJI fleet.
*DJI handles all DJI Care Enterprise claims directly.
Water Damage Coverage
Fly fearlessly with DJI Care Enterprise, replace your aircraft even if its water damaged. Replacement units are also provided for: Crash & Collision Damage, Signal Interference, and other accidents caused by User Error.
DJI will cover all the shipping costs when you are using DJI Care Enterprise service, helping you to enjoy an optimal experience.
* This service is only available in the region covered by DJI Care Enterprise, and if outside a covered region, the shipping costs and customs clearance fees generated are not covered by DJI.
The Basic Combo provides 2 paid replacement within one year after the product is activated.*
The Plus Combo provides coverage limit equivalent to the product's value. An unlimited number of free repair can be offered within one year after the product is activated.
* The replacement products are brand-new or equivalent to brand-new products in performance and reliability.
** For Matrice 30, the first replacement fee is $630 / 665 € / £535, the second replacement is $720 / 750 € / £625.
For more information on DJI Care Enterprise, please visit www.dji.com