Yuneec ST10, ST10+, ST16 Replacement Joystick

Connection points came in all bend over not sure if they are damaged , but these need to be in separate boxes, not plastic bags, and checked before resale. other than than they seem fine :)

*VD* These were originally manufactured for the ST10 which uses a connection board 90 degrees offset from that of the ST16. In our tests, a single bend to align to the correct position did not adversely affect the function.

Searched for ST16 joystick replacement; this is the only vendor selling on the web. As previous reviewer noted, one connector is oriented vertically and requires moving 90 degrees to a horizontal position for use in the ST16. Otherwise it is a direct replacement and cured my poor rudder performance.