The new Yuneec E10T Thermal Camera was specifically designed for the H520 hexacopter. The E10T comes equipped with the following notable features:
- Remote Camera Settings
- 3 Axis Gimbal (X,Y,Z)
- 360 Degree Gimbal Rotation
- Low Distortion Lens
- Night Vision Capability
- Thermal Imaging
Potentially Saving Lives
When searching for people, the Yuneec H520 E10T Package enables you to look for people very quickly from the air with the thermal imaging camera. In the event of a fire, specific fire hot spots can be detected allowing for fast and efficient countermeasures against the fire, potentially saving lives in the process.
3-Axis gimbal with 360° Rotation
The Yuneec E10T camera/gimbal combination is stabilized via 3 axes and provides still images for inspection. The gimbal can be rotated 360° nonstop and provides a full panoramic view with the retractable landing gear.
Interchangeable Camera Systems
The Yuneec E10T can be exchanged with any other camera/gimbal combination compatible with the H520 such as the E50, E90 and CGOET. The copter does not need to be power cycled when changing the camera systems, preventing unwanted downtime so you can always work productively and effectively.
Other Notable E10T Features
- Hot-swap gimbal
- Dual video stream
- Continuous 360° gimbal rotation
- Full camera control via the ST16S
- Compatible with the H520 Hexacopter
- 320x256 or 640x512 thermal resolution
- Supports DataPilot and mission planning
- Up to 28 minutes flight time with the H520
- Thermal imaging and residual light camera
Yuneec H520 Commercial Hexacopter
- Six-rotor (Hex) safety, stability and reliability
- High wind-resistant airframe
- Interchangeable payloads/sensors
- Up to 28 minute flight time based on payload weight
- 360º continuous rotation camera gimbal
- Retractable landing gear
- ST16S ground station w/ integrated 7” display
- DataPilot™ mission control software system
- HDMI® output for 720P display to Command/Control
- Yuneec SDK application development
- Interchangeable payloads (E50,E90,CGOET)
- Precision Flight Plans
- Automated Flight Control
Law enforcement agencies increasingly rely on sUAS systems for accident scene reconstruction. The Yuneec H520 six-motor sUAS system allows Law Enforcement officers to safely and reliably record an accident scene in 2D or 3D. The H520 is compatible with 3rd party 3D imaging software and Yuneec’s DataPilot™ software enables autonomous flight for high-speed, precise data collection.
Yuneec commercial sUAS are designed with the inspection industry in mind with a sixrotor system that allows for precision flight and longer focal-length lenses that allow the sUAS to fly at greater distance from an asset. In high-wind environments, the Yuneec H520 sUAS system is able to hold position, allowing the solution to fly even when a manned inspection would be deemed unsafe.
Yuneec H520 sUAS are capable of low and slow flight with greater stability and safety than a typical quad-copter system. Greater airframe stability, combined with Yuneec’s 1-inch 4K resolution E90 camera, provides for higher quality imaging, resulting in superior high-resolution 2D ortho or 3D maps, precision volumetrics, and 3D surface models.
Pre-plan Your Flight Mission
EFFICIENT MISSION CONTROL SOFTWARE SYSTEM
Yuneec DataPilot™ is a complete solution for planning survey and waypoint-based UAV flight. Unlike other flight planning applications, DataPilot™ is integrated with the hardware and software control system utilized by the Yuneec H520 sUAS.
Precise Flight Plans
Our DataPilot™ software system enables users to efficiently and consistently create orthomaps, 3D scans, crop data imagery, or cinematic movement for repeatable, recallable aerial flight paths, without requiring expensive 3rd party software. Surveys, construction measurement, BIM components, perimeter security, accident scene reconstruction, forensic captures, 3D scans, orthomosaic, photo-stitching are generated with precision and efficiency via the DataPilot™ interface.
Missions may be stored for later recall, or planned off-site and transported to the control system via email, thumbdrive, or micro- SD card. Mac and PC users may plan missions offsite and execute missions on-site, allowing for timeplanning, collaborative mission planning, and archiving of missions in a cloud or local storage.
Automated Flight Control
DataPilot™ auto-generates survey paths with user-defined overlap/sidelap, and cross-hatching for precision 3D or large format image output. Users may define a survey resolution via altitude or inchper- pixel decisions, providing a platform that is capable of flight even in low altitude scenarios. DataPilot™ also allows for storage of maps from many map providers for access in areas with no connectivity, and provides tools for precise waypoint placement even in areas where no updated maps are available.
View Live Feed With The ST16S
DataPilot™ is integrated with the Yuneec ST16S Ground Control Station via the built-in Android 7” Multi-function display, and may be used for exporting flight logs, integrating with popular analytics and post-processing applications such as Pix4D™, Agisoft™, Datumate™, DroneDeploy™, Dronifi™, and many others.